|
Gen 2 Smarttool Levels
Product Options
SmartTool Level: |
|
|
|
SmartTool Digital Levels
Dependable, Accurate, Measures All Angles
Directional beep
- Guides you to your angle so you don’t have to see the level
- Beep rate increases as angle is approached
- Steady beep when angle achieved
- Changes tone when gone too far
- Perfect for shimming cabinets, leveling pool tables
Angle Copy
- Hold button freezes angle to be copied
- Readout shows the frozen angle
- Directional Beep begins when copied angle is approached
- Arrows show direction to copied angle
Alternate zero
- Hold button freezes angle to be copied
- Alt 0 button change frozen angle to the new zero reference
- Directional beep engages if activated
- Eliminates math when adding or subtracting from an angle
- Use for bending pipe, setting rafters, relative angle changes
Glowing horizontal vial
- No batteries required
- Any light source charges the vial
Model Comparison
GEN2 Features
Detailed List of Exciting Features
Directional beep
- Guides you to your angle so you don’t have to see the level
- Beep rate increases as angle is approached
- Steady beep when angle achieved
- Changes tone when gone too far
- Perfect for shimming cabinets, leveling pool tables
Angle Copy
- Hold button freezes angle to be copied
- Readout shows the frozen angle
- Directional Beep begins when copied angle is approached
- Arrows show direction to copied angle
Alternate zero
- Hold button freezes angle to be copied
- Alt 0 button change frozen angle to the new zero reference
- Directional beep engages if activated
- Eliminates math when adding or subtracting from an angle
- Use for bending pipe, setting rafters, relative angle changes
Glowing horizontal vial
- No batteries required
- Any light source charges the vial
|
GEN3 Features
All the Features of the GEN2 PLUS
Water and Dust Certified to IP65
- Hose off after concrete or muddy jobs
- Dust proof for the dirtiest environment
Back Light
- Horizontal vial glows
- Easy to read in dim to no lighting
New front cover design
- Larger buttons for gloved fingers
- Easier to read buttons
- Recessed mode button to prevent accidental changes
- More rugged – drop tested to over 3 feet onto concrete floor
Guided Calibration Process
- The industry’s most comprehensive field calibration
- Returns the level to factory accuracy for all 360°
- One button push then the level takes over
- Audible beep to indicate ready to move to next step
- Display shows orientation for next step with “UP”
- Takes less than 2 minutes
Six Modes to Do the Calculations For You
- Degrees - Machine set-up, pipe bending, saw set-up
- Percent Slope - ADA ramps, hand rails, curbs, landscaping
- In/ft Pitch - Fractional rise/fall over one foot run for plumbing, gutters,
- Digital in/ft Pitch - Digital rise/fall over one foot run for easy use in
- Mm/m Pitch - Metric readout for non-in/ft applications
New 72 Inch Length that is Perfect For
- door frames,
- long spans, concrete forms,
- drainage,
- application specific formulas
|
|
|
| | |
|
| |
| | |
|
|
|