Topcon 3D-MC Max Integrated 3D Dozer System
A
revolutionary dozing system, 3D-MCMax delivers the highest
productivity dozer solution for any rough or fine grading application. 3D-MCMax uses our industry leading
MC2+ IMU sensor son the body and blade as well as an optional third
IMU on the C-frame – all to keep the blade cutting edge on grade for any
application. This system was built to keep your productive on any job site –
providing maximum speed, maximum control, and maximum performance.
- Single
or dual antenna configurations
- Support
for 4-way, 6-way, and pitch control blades
- Eliminates
the need for GNSS mast
- Superior
performance for any rough or fine grading job site application
- Increased
blade response
- Accurate
as-built date for volume and productivity reporting
The
power of the system lies within the IMU sensors. These robust and highly precise sensors work
together with ruggedized cab-mounted antennas conveniently placed in secure
location on the machine. This intelligent design gives the operator
unobstructed visibility and the flexibility to doze at full throttle on any
surface, under objects or while in reverse.
The 3D-MCMax
system can be used for fine grading applications such as those traditionally
done by motor graders. With support for
4-way, 6-way, and pitch control blades, any dozer operation can benefit from a 3D-MCMax
system. The MC2+IMU
sensors work together to keep the blade as close to the surface as possible,
delivering a smooth and consistent pass for any slope.
Outperform
the field with the 3D-MCMax system.
It takes advantage of every movement made when the machine is in motion
and allows you to cut finish grade while driving in reverse at high
speeds. The result – a substantial
increase in your productivity.
3D-MC
machine control software
The
control box is intuitive and modern, our machine control software seamlessly
drives all components in the 3D-MCMax system.
Visualize
your every movement and have the integrated LED light bars guide you when you
are on grade.
Rapid
blade response
Built
tough for any environment, the MC2+IMU sensors mounted on the body
and blade deliver update rates to the system keeping the blade on grade at high
speeds.
Intuitive
control box
The
robust design of the control box is delivered in a lightweight, compact
aluminum housing – complete with integrated LED light bars, a graphical
interface and fast data processor.
Versatile
motion control interface
The integrated
radio, interchangeable receiver and controller with integrated boards for GNSS,
radio and controller to receive RTK corrections as well as drive valves of the
machine.
Fence
Antenna™ technology
Conveniently
mounted on the cab of the machine, the antenna captures all available GNSS satellite
signals while identifying and rejecting signal noise – for ultimate grade
control.